Home » Development, News, Technology News » Drive-charge electric motor recharges batteries or capacitor cells as you drive an electric car

Drive-charge electric motor recharges batteries or capacitor cells as you drive an electric car

alternator capacitor supercell electric motor

Drive-charge motor designed by Paul W Kincaid
eliminates having to plug in an electric vehicle to recharge

Nikola Tesla proved in 1931 just how easy it is to convert every new and used GM, Ford and Chrysler gas guzzling vehicle into a zero emission electric vehicle.. He removed the gasoline engine of a Pierce Arrow and replaced it with an electric motor and drove for hours, at speeds as high as 90 mph. Today, 81 years later, it is still possible to easily convert any gasoline engine vehicle into an all-electric vehicle and it will operate for hours – without having to stop and recharge.  Not a drop of oil, gasoline, hydrogen fuel, natural gas, bio-fuel or fresh water will ever have to be stripped mined. fracked, manufactured or used again.  No more polluting combustion engines.  No more exhaust systems.  No more vehicle CO2 pollution.

Today, in 2015, we can remove every gasoline combustion engine and replace it with a zero emission electric motor.  At the same time we can remove the gas tank, the fuel lines, the exhaust system, the water pump, radiator, and all emission control devices because an electric motor car doesn’t need them.  We didn’t need them 81 years ago and we don’t need them now.

We don’t need them because electric motor cars don’t need a drop of gasoline or diesel.  Because they don’t need or use a single drop of gasoline or diesel electric motor cars produce zero carbon (CO2) emissions.

The fact that electric cars don’t need fuel tanks or fuel lines means the elimination of fuel leakage and fuel fires in an automobile accident. How many people have been burned alive, trapped inside their burning oil fuel vehicle? No amount of airbags are going to save you if your oil fuel tank or oil fuel line ruptures and ignites. Apart from the horrific consequences of driving around, strapped inside an oil fuel bomb, the fuel tank needs to be constantly filled up with very expensive ($4 to $5 a gallon) diesel or gasoline fuel. Can you afford to continue to pay $80 to $100 to fill up? How far can you go on $80 to $100 of oil fuel? Does it last you the week?

Electric cars have no rusting and pollution (CO2) emitting exhaust manifolds, no catalytic converters, no O2 sensors, no mufflers and no tailpipes. How much does it cost you every year to replace those rusting oil fuel exhaust parts?

Electric motor vehicles have no radiators, no toxic radiator fluid, no coolant pump, no coolant lines and no radiator hoses. Electric motors don’t get as hot as oil fuel engines so they don’t need all those costly and bulky cooling system parts. That means if you drive an electric vehicle you won’t overheat and get stranded on the highway in rush hour traffic, during a heatwave.

You can run an electric vehicle indoors for hours or days and not kill (by CO2 asphyxiation) anyone. Try doing that with a oil fuel vehicle and you will no doubt send a lot of people to the hospital or to the morgue.

We didn’t need combustion engines 81 years ago and we don’t need them now that the problem of recharging has been solved by using a drive-charge motor to recharge the electric car batteries or capacitor cells as you drive.  Recharging as you drive gives electric car greater driving range – more miles per volts.

Short URL: http://www.kincaids.ca/news/?p=38

Posted by on Oct 8 2015. Filed under Development, News, Technology News. You can follow any responses to this entry through the RSS 2.0. You can leave a response or trackback to this entry

You must be logged in to post a comment Login

October 2017
S M T W T F S
« Jul    
1234567
891011121314
15161718192021
22232425262728
293031  

PLC meter

Can't figure out why your electrical bill is so high even though you've replaced all of your incandescent light bulbs with the toxic cancer causing florescent bulbs, and you've spent hundreds of dollars on insulation and energy efficient appliances and windows?

The weather isn't to blame because your new insulation and windows are keeping out the cold. The Crown owned hydro electric power companies are.

They are stealing your hard earned money by literally breaking and entering into your home via the power lines and turning on the electric baseboard heaters you turned down before you left your home for work or school.

The Crown and its Electrical Power Crown Corporations are using smart technology called Power-line communication (PLC) to electronically hijack the controls of all of your high energy demanding electrical appliances. Power-line communication (PLC) technology was developed to use narrow band power-line communication to control your homes' electrical equipments such as meters, switches, heaters and domestic appliances. They are using this technology to hijack your home and jack up your home's hydro demand. More electricity used means more profit for the Crown through the thieving electrical power Crown Corporations.

A signal is transmitted via the hydro power lines to your home's "Smart Meter" and the signal is decoded by the "Smart Meter" and remotely turns on your electrical heaters and appliances. How can you detect this break and enter? The signal transmissions are preprogrammed to be "automatically" sent at specific times of the day, usually on the hour or half hour.

Don't expect the RCMP to investigate. They too illegally serve (crimes of treason and high treason) the foreign head of state, the Crown (the Pope) as his martial law "military" force. Formed by Pope Pius IX, the Crown, in 1876 as the Pope(s)' Dominion of Canada Police. Renamed RCMP in 1920 after the Pope's Second Reich was defeated by Canadian, British and U.S. forces.

Invest in clean energy

Looking for investors or sponsors to help build and test the proprietary clean energy devices featured on this website. Contact Paul W Kincaid using the "Contact Form" link above or by mail or in person at:

Paul W Kincaid
energy technology designs & solutions
5-9352 Main St
Richibucto, NB
E4W 4C8

Interac e-transfer available to individuals who would like to send money right away to help develop any specific clean energy device designed by Paul W Kincaid. The FuelReducer mpg+ (pictured below) & FuelReducer Oi are the only devices already manufactured and sold since 2006. Use the "Contact Form" link above to obtain the email address for Interac e-transfer.

DIY FuelReducer mpg+



Click on the PayPal Add to Cart button above to purchase (cost just $10) and download a .pdf instruction file on how to make your own FuelReducer mpg+ (developed and marketed by Paul W Kincaid) using mass produced, store bought, parts. You can use the instruction pdf file to build your own FuelReducer mpg+ and add an average of 5 mpg (potentially adding 100 miles per 20 gallon gas tank) to your vehicle's fuel efficiency plus (+) lower carbon emissions.  This simple device added 6 mpg to the fuel efficiency of a 1970 RS/Z28 Camaro powered by a 350 492 HP engine and the vehicle's owner reported that it ran the quarter mile in 11.92 seconds with a DIY FuelReducer mpg+ installed. After you checkout and complete your payment you will be automatically redirected to the url of the pdf file. Download the file immediately or bookmark the url.

Hydrogen Fuel from Water



FuelReducer H2O Fuel Cell video demonstrates just how easy it is to fuel the World with hydrogen fuel from water instead of oil or gas. Hydrogen (H2) fuel cells are being developed to convert any gasoline fueled vehicle into a hydrogen fueled vehicle that has zero emissions.  Instead of gasoline your vehicle can be fueled with hydrogen that is split from water using a radio wave frequency.  You can use water collected from a stream, pond, lake, river, ocean, ditch, swimming pool, household faucet or rainfall to fuel your vehicle, heat your home, cook your food, and fuel your electrical power generators.     In the video above just 4.5 volts was used to split water into a hydrogen and oxygen gas. Some of the frequencies (F) in hz and Duty Cycle (D) used - F640 D60, F800, D80, F1200. 6 volts would produce considerably more hydrogen gas fuel and 12 volts (just 10% or 1/10 the electrical power needed to power every toxic fluorescent light which requires 120 volts to operate) would produce more than enough hydrogen fuel to power a gas combustion engine like a portable electrical power generator. Another video of a working hydrogen fuel cell

Electric Cars Built 1st

Thomas Edison in his 1914 electric car. The electric car has been around longer than the gasoline car. They were being manufactured and sold before the advent of the gasoline powered cars .

Gas to Electric



Video shows you just how easy it is to convert a gasoline powered car into an all electric powered car. If a home mechanic can easily do it the automakers most certainly can too.

Free renewable biofuel



Uganda Africa construction video on how to make your own backyard biogas plant.  Daily gas production capacity of the above constructed digester is 2.6 cubic meters (time stamp 3:23).  That is equivalent to 2600 liters or 16.4  barrels of oil or 687 US liquid gallons.  For comparison an empty 20 lb barbecue propane tank will hold about 4.7 gallons of propane. Biogas can be used to heat your home, cook your food and power gas electric generators.  In the US and Canada you can use your existing prefab concrete or plastic septic tanks and produce your own biogas to fuel your home.  Bury a sealed plastic barrel or tank next to the septic tank and run a plastic tube from the top of your septic tank to the buried sealed plastic barrel or tank.  Then add a propane gas valve and fitting, like the ones from a barbecue, to the top of the sealed buried barrel or tank and you have your very own natural gas supply.

© 2017 Paul W Kincaid. All Rights Reserved. Log in - Designed by Gabfire Themes